Compuprint 914 Manuel d'utilisateur télécharger pdf (Page 97)

Setting Print Attributes

SO or ESC SO

Sets double width printing.

0E or 1B 0E

14 or 27 14

DC4

Cancels double width printing.

ESC W {n}

Sets or cancels double width printing.

1B 57 {n}

27 87 {n}

In IBM mode, if {n} = {odd number}, double width printing is set. If {n} = {even

number}, double width printing is rese, the range is 0 ≤ n ≤ 255. In EPSON mode

if {n} = {1}, double width printing is set. If {n} = {0}, double width printing is

reset.

ESC [ @ {l} {h} {m1}...{m4}

Changes height and width of characters and

modifies vertical spacing appropriately (only IBM

mode).

1B 5B 40 {l} {h} {m1}...{m4}

27 91 64 {l} {h} {m1}...{m4}

The {l} and {h} parameters specifies the number of {mx} mode bytes contained

in the sequence (normally l=4 and h=0). The {m1} and {m2} parameters must be

equal to 0. The {m3} and {m4} parameters specify the printing characteristics.

The {m3} high nibble specifies the line feed multiplier; {m3} low nibble specifies

the height multiplier .

Appendix A

A78401745-001

A.13

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 145 146

Pas de commentaire

Compuprint 914 Manuel d'utilisateur Page 97