Compuprint 10200 Programmer Manual Manuel d'utilisateur télécharger pdf (Page 124)

Commands

120

ESC [ p

Horizontal position absolute (HPA).

ASCII Code ESC [ p

Hexadecimal Value

1B 5B p

Decimal Value

27 91 p

This command causes the print position to be moved to the decipoint location specified by p

This sequence can be used to print within the left, top and bottom margins.

ESC [ p

Horizontal position relative (HPR).

ASCII Code ESC [ p

Hexadecimal Value

1B 5B p

Decimal Value

27 91 p

This command causes the print position to be moved to the right relative to the current position.

The p

parameter specifies the number of decipoints. This command cannot be used to move

beyond the right margin.

ESC [ p

; p

Left/right margin set (SLR).

ASCII Code ESC [ p

; p

Hexadecimal Value

1B 5B p

3B p

Decimal Value

27 91 p

59 p

115

This command sets the left and right margin values. The p

parameter specifies the decipoint

value of the left margin. The p

parameter specifies the decipoint value of the right margin value.

The default value for the left margin is 0 while for the right margin it is the maximum width

supported by the printer configuration (that is 13.6*720=9792).

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 233 234

Pas de commentaire

Compuprint 10200 Programmer Manual Manuel d'utilisateur Page 124