Compuprint 10200 Programmer Manual Manuel d'utilisateur télécharger pdf (Page 78)

Commands

DC1

Selects printer. (EPSON)

ASCII Code DC1

Hexadecimal Value 11

Decimal Value 17

This command causes the printer to be enabled after it has been disabled by the DC3 command.

DC3

Deselects printer. (EPSON)

ASCII Code

DC3

Hexadecimal Value

Decimal Value

This code deselects the printer. The printer remains deselected until it receives a DC1 command

or power is turned off then on again. The printer ignores the ESC @ command (initialize printer)

when it is deselected.

DEL

Deletes the last character. (EPSON)

ASCII Code DEL

Hexadecimal Value 7F

Decimal Value 127

This command causes the printer to delete the last printable character sent to the printer.

Printer control codes are not affected. The printer ignores this command if it follows a command

that moves the horizontal print position (ESC $, ESC \ or HT).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 233 234

Pas de commentaire

Compuprint 10200 Programmer Manual Manuel d'utilisateur Page 78