Compuprint MDP40B Programmer Manual Manuel d'utilisateur télécharger pdf (Page 11)

A-9

ESC ]

Sets a reverse line feed. (IBM 2391+, 4722, 9068)

ASCII Code ESC ]

Hexadecimal Value 1B 5D

Decimal Value 27 93

This code is a terminator code; when received, it causes the current contents of the

print buffer to be printed out, before reversing the paper by one line at the current

vertical spacing. If no data precedes this command or if the preceding data consists of

spaces, the code causes only a reverse line feed to be performed. When the line counter

is equal to or less than the top of the form value, the ESC ] is ignored.

ESC 5

Sets an automatic line feed after a carriage return.

(IBM Proprinter XL24/XL24E, 2391+, 4722, 9068)

ASCII Code ESC 5

Hexadecimal Value 1B 35

Decimal Value 27 53

If n is equal to 1, this command sets an automatic line feed on receiving of a CR code.

If n is equal to 0, this command cancels the automatic line feed.

Automatic line feed

0 Disabled

1 Enabled

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 288 289

Pas de commentaire

Compuprint MDP40B Programmer Manual Manuel d'utilisateur Page 11