Compuprint MDP40B Programmer Manual Manuel d'utilisateur télécharger pdf (Page 75)

A-73

The parameters in the command have the following meaning:

and

The

and

parameters are two decimal numbers that define the first and the

last characters to be replaced in the character set in use.

It sets space to the left of each proportional user-defined character.

Actual width of user-defined characters.

It sets space to the right of each proportional user-defined.

...d

They are the character data that is printed.

Maximum character width (height x width):

Print quality 10 cpi 12 cpi 15 cpi Proportional

Draft 24 x 12 24 x 10 24 x 8 Not available

Normal size 24 x 36 24 x 30 24 x 24 24 x 42 LQ

Super/subscript 16 x 36 16 x 30 16 x 24 16 x 42

ESC :

Copies characters from ROM to RAM. (EPSON ESC/P2)

ASCII Code ESC :

NUL

n m

Hexadecimal Value 1B 3A

n m

Decimal Value 27 58

n m

Range 0 <

< 127

= 0

This code copies the character generator in ROM into RAM area dedicated to the user-

defined characters. The

parameter represents the LQ typestyle.

The following attributes are reflected in the copied font: Typeface, international

character set, size (super/subscript or normal), quality (draft/quality). Before copying

ROM characters to RAM, cancel italics with the ESC 5 command. After copying you

can italicize characters by sending the ESC 4 command.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 288 289

Pas de commentaire

Compuprint MDP40B Programmer Manual Manuel d'utilisateur Page 75