Compuprint MDP40B Programmer Manual Manuel d'utilisateur télécharger pdf (Page 210)

C-68

ESC -

Measure document length. (Olivetti PR2, PR40+)

ASCII Code ESC -

Hexadecimal Value 1B 2D

Decimal Value 27 45

If the document is not inserted, the printer feeds it in, measures its length in

elementary steps and sends the value to the CU by means of the ESC S n command.

The elementary step value is expressed in n/240" or n/216", depending on the value

selected in setup.

When the command has been executed, the position of the document is unknown, so

its next position must be given by an absolute position setting.

The command is not accepted (command specification error) if:

• It is sent inside a printing field.

• A device other than the front paper stand is selected.

ESC } -

Measure document width. (Olivetti PR2)

ASCII Code ESC } -

Hexadecimal Value 1B 7D 2D

Decimal Value 27 45 125

If the document is not inserted, the printer feeds it in, measures the width in

elementary steps and sends the value to CU by means of ESC S n. The elementary

step value is 1/240"

The command is not accepted (command specification error) if:

• It is sent inside a printing field.

• A device other than the front paper stand is selected.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 288 289

Pas de commentaire

Compuprint MDP40B Programmer Manual Manuel d'utilisateur Page 210