Compuprint MDP40B Programmer Manual Manuel d'utilisateur télécharger pdf (Page 157)

C-15

The command is not accepted (command specification error) if it is sent with

superscript or subscript enabled.

• It is sent with the OCR-A or B Font selected.

• It is sent with a document positioned at the first printing line.

• It is sent inside a printing field.

ESC e

Cancel double height and double width. (Olivetti PR2, PR40+)

ASCII Code ESC e

Hexadecimal Value 1B 65

Decimal Value 27 101

Cancels the double height setting starting from the current position. As the double

height setting also activates double width, canceling the former feature also cancels

the latter, unless the latter was set previously using ESC 3.

The command is not accepted if it is sent inside a printing field.

ESC ! W 1

Double height. (Olivetti PR2)

ASCII Code ESC ! W 1

Hexadecimal Value 1B 21 57 31

Decimal Value 27 33 87 49

Sets the printing of double height characters starting from the current position. The

print pitch is not changed. This setting remains active until the relevant cancellation

command is received.

The command is not accepted if it is sent with the OCR-A or B Font selected.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 288 289

Pas de commentaire

Compuprint MDP40B Programmer Manual Manuel d'utilisateur Page 157