Compuprint MDP40B Programmer Manual Manuel d'utilisateur télécharger pdf (Page 149)

C-7

ESC J

Set left margin. (Olivetti PR2, PR40+, 2845)

ASCII Code ESC J

Hexadecimal Value 1B 4A

Decimal Value 27 74

Sets the current position of the left margin of the print line with respect to the edge of

the paper or the margin set using ESC | A n. This position depends on the type of

print pitch selected (double width is considered as normal spacing).

The decimal value of n defines, as an absolute value, the position of the left margin,

which will coincide with the first printing position of each line. This position is

assigned the value 001 and becomes the reference point for all horizontal positioning

commands.

If n is equal to 000, the left margin will be set at the edge of the paper or at the

margin set using ESC | A n.

If the value of n exceeds the length of line-1, the edge of the paper or the margin set

using ESC | A n will be set.

The command is not accepted (command specification error) if:

• It is sent inside a printing field.

• Parameter n is greater than 255.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 288 289

Pas de commentaire

Compuprint MDP40B Programmer Manual Manuel d'utilisateur Page 149