Compuprint MDP40B Programmer Manual Manuel d'utilisateur télécharger pdf (Page 130)

B-23

bit 0x40 = 1 debug: the result of the decoding of the barcode will be sent

together with the vector of the values read by the reading

sensor

bit 0x80 = 1 must always be 1

Distance from the first print position in mm of the highest leftmost point to

be scanned (in case of cut sheets it is at 3 mm from paper margin)

Distance of the upper paper/page margin of the highest leftmost point to be

scanned

Dimension of the scanning area including the clear area in mm

… t

List of the recognized bar code types

0x11 128

0x01 3 of 9

0x0c 2 of 5 interleaved

0x19 2 of 5 IATA

If no bar code type is specified, they are all recognized.

… o

Listing of the options. Each option is followed by the corresponding

parameters. The options are:

0x01 Check digit

0 No check, the barcode string is returned as it is decoded

1 Check digit is checked: when the barcode is decoded, the printer

checks that the check digit, if present, is correct. If it is not, the

barcode scanning is not valid.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 288 289

Pas de commentaire

Compuprint MDP40B Programmer Manual Manuel d'utilisateur Page 130